The tie rod ends of my Triumph Spitfire had been neglected far too long- especially when you consider I had purchased a new set and they have been sitting in a box for some time…

The process to replace the tie-rods is fairly straight forward and is assisted with help from a tie-rod removal tool. Beginning on one side, I removed the right front wheel so that I can have better to access the tie rod.

tie_rod1

Back off locking nut a half turn or so.

tie_rod2

Remove the nut from the underside of the tie rod end, then using the tie rod removal tool and a large crescent wrench I tightened the bolt until the tie rod end popped loose

tie_rod3

Once free of the vertical link the tie rod unscrewed easily.

tie_rod4

Spin the new tie rod on, bolt it through the vertical link, and snug the lock nut to the new tie-rod end.

tie_rod5

Remount the wheel and repeat on the opposite side.